The application of Bulk ethernet cable in the local area networks is seen as the best solution to the frequent problems faced in the client server environment. For example you can consider networks nodes located above the distance of 100 meters from the server. In the earlier scenario, you needed to depend on switches for strengthening the signal strength. Moreover protection of the traditional cables was a tough task. Exposure to heat and humidity could wear out the external covering of the cables, exposing the internal parts. So, there was a need for external piping. In addition the electrical cables passing next to the data cables caused disturbances in data packet transmission. With the introduction of Bulk ethernet cable these problems have been effectively solved, especially for the industries like manufacturing units who use client server networks in a large scale.
Bulk Ethernet Cable – Basics
The Bulk ethernet cable comes in many categories, the main ones being Cat-5 and Cat-6 with their subtypes. Every type of cable has specific structure and design. The network experts configure these specifications according to their applications, environmental conditions (in which they work) and the other functional parameters.
- Installation Procedures: – The installation procedures for the Bulk ethernet cable can be quite complex in nature, especially when it comes to long distance networks. They can be broadly categorized into shielded and unshielded types. Twisted pairs of cables are used for the data transmission. The unshielded types have a thick layer of plastic coating on them. The shielded types have multiple layers of plastic, rubber and even metallic coating below the final plastic coating. The procedures involving installations start from the switch near the main server. The main cable from the server is connected to the switch. The cables to the network nodes are drawn from the switch and extended to connect the client computers. Additional switches and routers can be installed in the middle, if the network engineer feels the probability of signal weakening. The experts use many equipment and tools for the installation. The crimping tools are the ones used for pairing the set of cables at both the ends, based on the color combination. This procedure is the key to proper flow of data between the two ends.
- Crimping Procedure: – The network engineer uses the crimping tool for proper pairing and fusing of the cable into the “crimp”. Crimps are provided at both ends of the cable. They are in fact the “connectors” to the computers, switches and the routers. You can read more about the Bulk ethernet cable crimping procedures from the installation and crimping manuals.
Bulk Ethernet Cable – Functionality
The Bulk ethernet cable works with all sorts of hardware and OS configurations. They are compatible for peer-to-peer networks, LAN and the Wide area networks (within specific distance limitations as specific by the manufacturers) with specific signal boosters. You may use them in corporate offices, industrial areas, high rise buildings, tropical zones and other regions with extreme external conditions. The Bulk ethernet cable works efficiently for many decades.